Teradek Bolt 500

150,00

3G-SDI/HDMI Video Transceiver Set

The Bolt 500 3G-SDI/HDMI Video Transceiver Set from Teradek includes one Bolt 500 3G-SDI/HDMI video transmitter and one Bolt 500 3G-SDI/HDMI video receiver. The combination of these lets you transmit video signals a distance up to 500′. Both transmitter and receiver feature metadata and timecode support, 3D LUTs, dual inputs/outputs, are multicast capable, and offer manual frequency selection and the USB 3.0 GRAB Engine.

Descrizione

  • Bolt 500 3G-SDI/HDMI Video Transmitter
    Video Inputs 1 x 75 Ohms BNC
    1 x HDMI female Type A
    Video Outputs 1 x 75 Ohms BNC (loop-out)
    Input / Output 3G-SDI/HDMI
    Color Sampling SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)
    HDMI: RGB 4:4:4, 8-bit
    Latency <0.001 seconds
    Delay <0.001 sec (when no video format conversion is enabled)
    Supported Resolutions 1080p 23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60
    1080p sf23.98 / 24 / 25 / 29.97 / 30
    1080i 50 / 59.94 / 60
    720p 50 / 59.94 / 60
    480p 59.94 / 576p 50 (via HDMI ports only)
    480i (NTSC) / 576i (PAL)
    Video Compression Visually lossless
    Color Correction CDL/1024 1D LUT (supports 10-bit color)
    33 x 33 x 33 3D LUT (supports 10-bit color)
    Frequency Non-DFS Frequencies:
    5.19 to 5.23 GHz
    5.755 to 5.795 GHzDFS Frequencies:
    5.27 to 5.55 GHz
    5.67 GHz
    Channel Selection Auto
    RF Power 17 dBm EIRP
    Range Up to 500′ (152 m)
    Encryption AES-128
    Audio Compression 48 kHz 24-bit PCM
    Audio Input Embedded
    Switches On/Off
    Reset Switch
    Application Bolt Manager Application for OSX & Windows
    Noise Rejection Can coexist with Wi-Fi and 5 GHz cordless phones
    Construction Milled aluminum (chassis) and regulation-compliant PCB
    Plastic cap
    Power Input Connector 2-pin 7 to 28 VDC
    Power Consumption 7.3 W nominal @ 1080p
    Operating Temperature 32 to 104°F (0 to 40°C)
    Dimensions 1.0 x 2.6 x 4.0″ (2.4 x 6.6 x 10.2 cm)
    Weight 7.6 oz (217 g)
    Packaging Info
    Box Dimensions (LxWxH) 6.6 x 6.5 x 4.8″
  • Bolt 500 3G-SDI/HDMI Video Receiver
    Video Outputs 1 x 75 Ohms BNC
    1 x Micro-USB 3.0 female type B
    1 x HDMI Type A female
    Input / Output 3G-SDI/HDMI
    Color Sampling SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)
    HDMI: RGB 4:4:4, 8-bit
    Latency <0.001 seconds
    Resolution 1080p60
    Video Compression Visually lossless
    Test Pattern Generator Custom output formatted test pattern over HDMI and SDI
    Color Correction CDL/1024 1D LUT (supports 10-bit color)
    33 x 33 x 33 3D LUT (supports 10-bit color)
    Frequency Non-DFS Frequencies:
    5.19 to 5.23 GHz
    5.755 to 5.795 GHzDFS Frequencies:
    5.27 to 5.55 GHz
    5.67 GHz
    Channel Selection Auto
    RF Power 15 dBm EIRP
    Range Up to 500′ (152 m)
    Encryption AES-128
    Audio Compression 48 kHz 24-bit PCM
    Audio Input Embedded
    OSD Appears on the video output which can be controlled with the menu joystick
    Switches On/Off
    Reset Switch
    Application Bolt Manager Application for Mac OS X & Windows
    Noise Rejection Can coexist with Wi-Fi and 5 GHz cordless phones
    Construction Milled aluminum (chassis) and regulation-compliant PCB
    Plastic cap
    Power Input Connector 2-pin 7 to 28 VDC
    Power Consumption 9 W nominal @ 1080p
    Operating Temperature 32 to 104°F (0 to 40°C)
    Dimensions 1.0 x 3.5 x 5.8 (25.2 x 88.9 x 146.5 mm)
    Weight 10.5 oz (299 g)

This page is also available in: enEnglish